3 Jaw 80mm D80/Ring/Round Wheel Rotary Axis for Fiber Laser Marking Machine/Pen

  

3 Jaw 80mm D80/Ring/Round Wheel Rotary Axis for Fiber Laser Marking Machine/Pen. 1 x Rotary Axis A, B and C (Optional). Model 1:D80 Rotary Axis.

Motor: 5776mm(SNOWIT) With 2 Meter wire. Total height High version 250mm. Centre height High version: 130mm. High version support 180 degree adjust. Application: Fiber laser marking / Laser welding / CO2 laser engraving.

Model 2:Ring Jewelry Rotary Axis. Center height: 50MM (with an elevation angle of 90 degrees). Internal clamp application (product outer diameter 2 to 83mm), External support application (product inner diameter 11 to 91mm). Application card needles: Factory equipped with four types of card needles with 3 each Transmission mode: direct connection.

External dimensions: 130 90 90mm. Installation hole size: 50 50MM M5. Chuck maintenance, regularly adding lubricating oil to moving parts to improve service life. Advantages: Strong force, no shaking. Quick loading and unloading, improving efficiency (RE: The 69 chuck is only suitable for light and short products such as rings, bracelets, insulated cup covers, etc For slightly heavier categories, it is recommended to use a standard three grip chuck). Model 3:Round Wheel Rotary Axis. RE: 2 sides can use, front side with 24 channels, back side with M6 screw holes. Need to use together with stepper motor drive. Channel: 24pcs (Back side each channel with 4 pcs M6 screw holes).