- Home
- Laser Frequency
- Laser Power
- Marking Size
- Marking Speed
- 0- 10000mm / S (155)
- 0-12000mm / S (3)
- 0-7000mm / S (11)
- 0-8000mm / S (163)
- 12m / S (3)
- 15000 Mm / S (5)
- 15000mm / S (169)
- 1500mm / S (2)
- 2m / S (2)
- 6000mm / S (28)
- 7000 Mm / S (67)
- 7000mm / S (114)
- 7m / S (23)
- 7m / S (275.6in / S) (45)
- 7m / S(275.6in / S) (2)
- 7m / S275.6in / S (4)
- 8000 Mm / S (73)
- 8000mm / S (6)
- Up To 10000mm / S (13)
- ≤7000mm / S (8)
- ... (3859)
- Software
- Voltage
- 110 / 220v (128)
- 110 V, 60 Hz (107)
- 110v (97)
- 110v / 220v (156)
- 110v 60 Hz (17)
- 110v 60hz (99)
- 110v, 50 Hz (4)
- 110v, 50hz (8)
- 110v, 60 Hz (58)
- 110v, 60hz (10)
- 120v 60hz (5)
- 2200v / 60hz (7)
- 220v (22)
- 220v / 110v (5)
- 220v, 50 Hz (9)
- 220v, 60 Hz (7)
- Ac 110 / 220v (5)
- Ac 110 V (7)
- Ac 110v (3)
- Ac220 / 50hz (13)
- ... (3988)
Brilliance Black Metal Marking Spray CO2 YAG Fiber Laser Engrave BLI101 12 Oz
Black Metal Laser Spray Can - 12oz Aerosol. Product Key Features Why Brilliance Laser Inks? Laser marking made easy with our Aerosol Spray (in 2 oz & 12 oz) Exceptionally adaptable laser marking inks to create high quality permanent mark on a various metal surfaces. With just a shake and a spray, conveniently make a permanent mark on your metal substrate with our aerosol spray. It comes in two sizes: 2 oz. And 12 oz to fit your needs. Note that this product does not include any alcohol in the package.
Below application tutorial is for instructional purposes only. Shake & spray application Easy to apply. Anti-Clog Technology Permanent Mark Quick to dry Marks on various metals Up to 4,000 square inch of coverage Works with CO2 and Fiber Laser Nd:YAG Laser Systems How To Apply Aerosols Step 1 Clean the substrate with denatured alcohol so it's free of any dirt and oil.
Shake the bottle well for approximately 2 minutes to make sure that all contents are mixed. Step 2 Hold the bottle at 45° degrees and spray 6-8 inches from the substrate surface using left to right motion. Apply a thin coat as long as you do not see through the surface. Wait for the mixture to dry completely or use a hair dryer to dry it in seconds.
Step 3 Adjust and focus your laser settings according to the material and make your mark! You may refer to the table below on Suggested Laser Machine Settings. Step 4 No waiting time needed to wash off!
Rinse with tap water or wipe with a wet cloth. You now have a permanent on a finished product. Up to 4,000 square inch of coverage. Works with CO2 and Fiber Laser Nd:YAG Laser Systems. Laser marking made easy with our Aerosol Spray (in 2 oz & 12 oz). Exceptionally adaptable laser marking inks to create high quality permanent mark on a various metal surfaces. With just a shake and a spray, conveniently make a permanent mark on your metal substrate with our. Note that this product does not include any alcohol in the. Clean the substrate with denatured alcohol so it's free of any dirt and oil. Hold the bottle at 45° degrees and spray 6-8 inches from the substrate surface using left to right motion. Adjust and focus your laser settings according to the material and. No waiting time needed to wash off! Sorry, our items are NOT available for pick-up.No additional information at this time. Black Metal Laser Spray Can - 2oz Aerosol. Lazact White - Laser Activated Additive for Black Color Molded Parts- Reveals Wh. Red (Copper Tone) Stainless Steel Laser Spray Can - 12oz Aerosol.
Red (Copper Tone) Stainless Steel Liquid Ready - Laser Marking Powder.