Coherent NUFERN NUQA Fiber Laser marking engraving with manual 1

  

Coherent NUFERN NUQA Fiber Laser Marker with manual. This is Coherent NUFERN NUQA 1064nm Fiber Laser Marker that was removed from a working environment. The laser and fiber are in good condition. The glass window of the laser aperture is very clean and covered with tape and cover dust (see photos). You will need a 24V DC power supply to run this laser.

The laser comes with a flash drive containing a PDF copy of the operating manual that explains how to operate this laser using a DB25 parallel interface or using RS-232 interface. The NuQT fiber laser from Nufern is a pulsed marker delivering 1 mJ pulse energy with a fast turn-on time and higher peak power (up to 10 kW) over a wide range of repetition rates (variable from 20-200 kHz), which maximizes production throughput and marking capability.

With its single-mode beam quality, the NuQ laser can produce ultra-fine, crisp marks every time. The system design ensures no bleed-through power when the gate signal is off, to prevent the appearance of ghost lines between marks, even on very sensitive materials. Complete with industry standard interfaces, the system is pumped by single-emitter diode lasers, which offer long lifetime and maintenance free operation. 100.0 W per output. Leakage Power in Off State.

7.50 ± 1.00 mm. Fiber to Free Space Isolator. 1064.0 ± 2.0 nm.

Output Cable Minimum Bend Radius. 215 x 136 x 284 mm. 0 to 85 % RH non-condensing. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "tassilia" and is located in this country: US.

This item can be shipped to United States.

• Brand: coherent nufern
• Engraving Method: Laser
• Type: Engraving Machine
• Machine Operation: Manual
• Model: NUQA