Fiber Laser Marking

JPT MOPA M7 30W 60W 100W Fiber Laser Engrave Marking Machine Motorized Rotary

JPT MOPA M7 30W 60W 100W Fiber Laser Engrave Marking Machine Motorized Rotary

JPT MOPA M7 30W 60W 100W Fiber Laser Engrave Marking Machine Motorized Rotary   JPT MOPA M7 30W 60W 100W Fiber Laser Engrave Marking Machine Motorized Rotary

ZIP code from 3xxxx to. For residential address deliveries and lift-gate service. Please kindly find below links.

JPT M7 series high power pulsed fiber lasers make use of master oscillator power amplifier (MOPA) configuration. Laser performance as well as high level of temporal pulse shaping controllability.

Repetition frequency (PRF) and pulse width can be controlled independently. In MOPA configuration, through adjusting. Of the above parameters, the peak power of laser.

JPT laser suitable for more material processing which. The higher output power makes its advantages especially in high speed marking applications.

Fiber Marking Machine x 1. Tolls bag (Foot pedal, USB cable, power cable, goggle) x 1. Axis x 1 (30W not included). The laser source was tested before sent.

But, it is still 0.7% case happened because damaged on transportation. Q: What can I do with Fiber Laser Marking Machine? A: Fiber Laser is an exciting tool utilizing relatively new technology. Never before engraving on metal could be done with. Such speed and precision as with fiber lasers.

It's easy to build a solid business with such equipment. For creative people the possibilities are almost endless. Fiber laser could be adjusted for use on many different materials, including all types of metal like, gold, silver, titanium, aluminum, brass, stainless steel, but also on leather, wood, some polymers and organic materials.

This equipment is used in many industries and for variety of applications, like products code marking, gifts personalization, jewelry, decorations, knives and guns engravings, and much more. Q: Can this fiber laser mark in color? Is there parameters for reference? A: JPT MOPA M7 series can mark in color. JPT LP series and Max can't. Colors are dependent on a myriad of variables including room temperature, temperature of the material, finish of the material, type of material, focus, lens and a host of other things. Not to mention variances between actual individual laser machines.

It's a very experiment, experiment, experiment. Ablating is easy and translates pretty well from machine to machine - but specialized anneals there are just so many factors it makes it virtually impossible to give a list and say "here's the magic". Q: What is the difference between JPT laser and Raycus/Max laser? A: JPT is MOPA while Raycus/Max is Q Switch. JPT offer more frequency range.

Q: Why should I invest in a JPT laser source? A: There are several advantages of JPT LP technology over Q-switched pulsed fiber lasers with frequencies ranging from 20 to 80 kHz. The JPT MOPA M7 model frequency ranges from 1 to 4000 kHz, and the RAYCUS RFL-P50QB model frequency ranges from 50 to 100 kHz, which allows you to work on various materials, not just metals. The laser beam quality is also a factor; JPT is a better choice for jobs requiring precision or artwork with intricate details. Q: I have no experience. Is it easy to use? A: Yes, HL laser focus on Fiber laser and co2 laser machine for more than 10 years. Also, we send you the marking parameter for some materials.

Q: Are your machine certified? A: The HL laser fiber laser machine is CE&FDA certified.

Q; What are computer operating system requirements for running HL laser fiber laser machine? Q: Do you sell spare parts? A: Yes, we sell spare parts as well, such as lens, Galvanometer etc. Q:What software of fiber laser maker support? A:The machine use the EZCAD2 software. Q: How about the after-sales service?

We will reply within 24 hours. Q: Is the laser compatible with lightburn software? A: Our fiber laser is equipped with EZCAD2 software and it is compatible with lightburn.

Q: Is it compatible with the new ezcad3 software? A: It doesn't compatible with EZCAD3. EZCAD3 is for 3D engraving, this fiber machine is for 2D engraving support EZCAD2. Q: Can I cut silver, gold or steel plates with it?

Not more then 1mm or less thickness? But, it has burn edge also cooling is important to keep even surface. Suggest to cut material under 0.8mm to have better result. Q: Does this system come with ezcad2 software?

If not, where do I get it and drivers for win 10 pro? A: Ezcad2 software is able to download from our website also driver. Dongle is no need as we use genuine JCZ control board. Q: Is the software compatible with mac?

I only saw windows but before purchasing this i need to be sure because all I own are macs. A: Hello, our marking machine software compatible with lightburn, if you use lightburn, it can be compatible with mac.

Q: Will this do a 3D etch? A: This fiber machine is for 2D engraving support EZCAD2. 3D marking requires machine with 2.5D function and run EZCAD3.
JPT MOPA M7 30W 60W 100W Fiber Laser Engrave Marking Machine Motorized Rotary   JPT MOPA M7 30W 60W 100W Fiber Laser Engrave Marking Machine Motorized Rotary