Monport GM 30W Fiber Laser Engraver Marking Machine 2.5D Metal Engraving Lightbu

  
Monport GM 30W Fiber Laser Engraver Marking Machine 2.5D Metal Engraving Lightbu. The Galvo Mini offers powerful and precise marking capabilities with unbeatable value.

Monport GM 30W Integrated Fiber Laser Engraver, LightBurn Compatible Laser Marking Machine with Red Dot Pointer, 5.9"x5.9" Metal Etching Machine for Metal Marking with 100000 Hour Lifespan BSLcad Included. Working Area: 5.9"x 5.9". Machine Dimension: 370 x 300 x 550mm. Package Dimension: 545 x 390 x 350mm.

Marking Speed: Up to 10000mm/s. Expected Service Life (MTTF): 100,000 hr. Brand New Integrated Mini Fiber Laser?

The brand new Monport fiber marking machine has a smaller size and lighter weight; Simultaneously maintaining the original high performance and a lifespan of up to 100000 hours. The fiber laser can engrave all metals.

Gold, silver, copper, stainless steel, brass, titanium, etc. The newly customized galvanometer system is equipped with more expensive silicon material reflectors, allowing for a maximum speed of 10000mm/s.

Monport has also customized an F-theta field mirror, which, together with the entire marking system, can achieve a carving accuracy of 0.01mm. For a 30W fiber laser, an area of 150150mm is optimal, as excessive engraving area may result in poor engraving effect or even distortion. After special tuning by Monport, even when carving at the edges, there will be no weak light. Deep Engraving and Cutting Capabilities? With this 30W fiber laser marking machine, you can perform 2.5D metal engraving, deep metal engraving, and even some metal sheet cutting usually the higher the power, the stronger the deep engraving and cutting ability, and the higher the efficiency.

If you want stronger and faster results, Monport recommends purchasing a 50W or above machine. All Monport fiber marking machines can be operated using Lightburn, but if you don't want to use Lightburn, we also provide free and easy-to-use software (Free software and backup parameters are saved on a USB drive and included in the packaging).

1x USB Cable(2 meters). 1x Power Cord(1.5 meters).

1x Usb to TypeC Adapter. GM: Brand New Integrated Mini Fiber Laser. 370 x 300 x 550mm.

4.3 x 4.3 in. 5.9 x 5.9 in.

6.9 x 6.9 in. On a Single Pass(depend on materials). (1 year for laser source). If you pay means you agree with the postal service.

If you have any question, feel free to send us a message and we will reply you within 24 hours. Due to the difference of time zone, sometimes the reply will be delayed with 24 hours(excluding weekend & holiday). Enjoy your visiting and shopping here.