OMTech Fiber Laser Source Q Switched Raycus P30Q for 30W Laser Marking Machines

  

OMTech Fiber Laser Source Q Switched Raycus P30Q for 30W Laser Marking Machines. Whether you're looking for a laser source replacement, upgrading your old fiber laser marker, or building a new one from scratch, OMTech has got you covered with the Raycus RFLP30Q. Using Q switched pulses generated from ytterbium doped optical fibers, this fiber optic laser source provides reliable peak outputs above 30W with minimal wear or energy consumption. Connected to any stable 24V DC power source through its 3 wires' open eyelets and given 4 inches of ventilation front and back, it provides more than 100,000 hours of rock steady service, producing clean ultrafast pulses through a 9'10 (3 m) fiber optic cable and 35mm collimator to make your mark on steel, aluminum, brass, gold, marble and gemstones, silicon, hard nontransparent plastics, and more. Controlled through a standard DB25 25 pin plug, this Yb laser source slots into any OMTech fiber system quickly and easily and works just as well for other systems with compatible hardware.

For all your projects engraving and marking metals, gems, silicon, and more, you can do no better! NOTE that this device produces exposed laser beams. It should NEVER be used without appropriate protective casings or around anyone not wearing protective eyewear adequate to shield against reflected beams from the invisible laser. Model: Raycus P30Q Q Switched Pulse Fiber Laser.

Main Dimensions: 10.2 x 15.4 x 4.7 in. Collimator Diameter: 1.4 in.

Single Pulse Energy: 1 mJ. Beam Quality (M2): 1.5.

Range: 32-100 F (0-40 C). Fiber Optic Cable Length: 9 ft. Expected Service Life (MTTF): 100,000 hr.

PROFESSIONAL SOLID-STATE LASER: Whether professional engraver or inspired DIYer, this 30W fiber laser source from OMTech will allow you to bring your ideas to life with greater speed and precision than ever before; our ytterbium doped Raycus RFLP30Q fiber source employs Q switched pulsing to give you the best bzzt for your buck! 3 STRAND & DB25 CONNECTIONS: This 30W laser source easily slots into any OMTech fiber laser system; it also works great as a laser replacement or upgrade for other fiber laser marking machines that are able to provide stable 24V DC power via a 3 wire setup and control their work through a 25 pin connection. SAFE & EASY OPERATION: Our fiber laser engraver source comes with a 35mm collimator on a 9'10 cord for helpful range whether in the workshop, lab, or garage; when its 3 cooling fans are provided with 4 inches of space front and back, this fiber laser is also exceptionally durable with an average service life over 100,000 hours.

MASTERFUL METAL MARKING: With its clean and ultrafast pulses centered around a 1064nm wavelength and adjustable in strength from 10-100%, this fiber laser marks and lightly engraves steel, aluminum, brass, gold, silver, and a wide range of other base and precious metals, as well as silicon, gemstones, and hard nontransparent plastics. Distance UNLESS the closer warehouse is out of stock for the specific products that customers have ordered. Your kind consideration is highly appreciated. If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any.

Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging. We cannot take back used products. We cannot take back installed or tired products.

We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. Feedback as much as you do. If for some reason there is.

As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "premiumautopart" and is located in this country: US. This item can be shipped to United States.

• Brand: OMTech
• MPN: FMMR30Q
• Engraving Method: Laser
• Type: Parts/Accessories
• Power: 30 W
• Model: Raycus P30Q Q Switched Pulse Fiber Laser
• Main Dimensions: 10.2 x 15.4 x 4.7 in. (26x39.1x12 cm)
• Collimator Diameter: 1.4 in. (35 mm)
• Doping Agent: Ytterbium
• Control Interface: DB25
• Input Voltage: 24V DC
• Avg.

  Output Power: 30W

• Power Tunability: 10-100%
• Single Pulse Energy: 1 mJ
• Pulse Duration: 110-130 Nanoseconds
• Pulse Frequency: 30-60 kHz
• Beam Diameter: 6-8 mm
• Min. Beam Quality (M2): 1.5
• Wavelength: 1064 nm (1060-1085 nm)
• Operating Temp.
  Range: 32-100 F (0-40 C)
• Max. Operating Humidity: 80%
• Fiber Optic Cable Length: 9 ft. (3 m)
• Expected Service Life (MTTF): 100,000 hr.
• Warranty: 2 Years
• Manufacturer Part Number: FMMR30Q
• UPC: 797434224439