Robotic Fiber Laser Marking System Sunx LP-F10 & Janome JS350 Scara Robot

  

Robotic Fiber Laser Marking System Sunx LP-F10 & Janome JS350 Scara Robot. 2005 Robotic Fiber Laser Marking System Equipped with Janome JS350 Scara Robot, Sunx LP-F10 Mark II Fiber Laser System with Aluminum Enclosure and Exhaust Port for a Fume Extractor to be Installed, and Allen Bradley Control System. This system was previously used to mark gas cap lids with "Tight Until Clicks" message.

It appears this machine would have gas caps loaded onto trays and the trays would be stacked on the conveyor on one end of the machine. The machine would feed one tray into the robot area where the robot would pick a cap from the tray and load it onto a rotating fixture. This rotating fixture has a pneumatically operated door that would raise and the fixture would rotate 180 degrees into the marking chamber. The fiber laser marker would mark the part while the robot was unloading the previous cap back onto the tray.

Once all caps on the tray were marked, the conveyor would discharge the finished tray out the opposite end where a stacker would begin stacking all trays from the bottom up. The conveyor at the same time would be loading the next tray into position for the robot to begin the process again. This machine could be easily adapted to mark many other products.

The Allen Bradley CompactLogix Processor has lost its memory and will need to be reprogrammed in order to operate the conveyor and pneumatic tray loaders. The memory loss does not affect the operation of the fiber laser marker or the scara robot.

This would be a great opportunity to get a great deal on a very expensive piece of equipment to improve and speed up your marking process. Robot Control Model: JSC 350 FC. Input Voltage: 220Vac Single Phase.

Other Categories We Deal In. Please make checks payable to Industrial Parts R Us Inc. Industrial Parts R Us Inc.

All Items Under 145 Lbs. We take pride in our work and go the extra mile to make sure your items are packaged properly to make it you, not only quickly, but in one piece. Orders placed before 12:00 P.

Next Day Air Orders need to be placed before 3:00 P. EST to ensure they will be processed in time.

Please leave a note on your invoice if Early A. Additional Charges will be applied for Early A.

We do our best to meet our customers needs. Please leave a note on your invoice including your account number and Account Zip Code. Please provide the following information in order to get the most accurate rate. State if a Liftgate will be Required for Unloading at the Destination (items over 3000 Lbs cannot be unloaded using a liftgate). Will guarantee all items new and used for 30 days after the item has been received. Thank you from Industrial Parts R Us!!! View Our Complete Range of Products. The item "Robotic Fiber Laser Marking System Sunx LP-F10 & Janome JS350 Scara Robot" is in sale since Friday, August 16, 2019. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Lab Lasers\Fiber Lasers".

The seller is "industrialpartsrusinc" and is located in Bardstown, Kentucky. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Brand: Janome
• Voltage: 220Vac Single Phase
• Robot Type: Scara
• Manufacturer: Janome
• Type: Robotic Fiber Laser Marker
• MPN: JS350
• Model: LP-F10
• Country/Region of Manufacture: Japan