30W Mopa 7.9x7.9 JPT Fiber Laser Marking Engraving Machine & Rotary Axis US

  
OMTech's 20W fiber laser engraver is your ultimate resource for engraving words, logos, pictures, barcodes, and more on metal including personalized gold and silver jewelry! And other materials with quick turnaround and perfect accuracy. Our device's state-of-the-art air-cooled fiber laser avoids the tetchiness, fragility, and water-based mess of CO2 laser tubes. Instead, it provides solid-state efficiency, quality, stability, and durability for its entire service life of 100,000 hours. The Sino-Galvo galvanometric system and compact F? Field lens ensure quick work with less than 1% distortion from your design. The built-in red dot locators allow you to precisely adjust the height of the laser arm to quickly find the exact focus for various materials. With the optional rotary axis, you are able to mark on curved surfaces. The machine is controlled by its included copy of EzCad2, compatible with Windows 7, 8, and 10. For all your projects marking and cutting metal, rubber, leather, and more, you can do no better. NOTE that this device has an open worktable. It comes with one pair of protective eyewear but anyone else in the room with the device should also have their own laser glasses to avoid any possibility of injury from its beam. Get the most out of your laser engraving equipment with OMTech! Acrylic, Hard Plastics, Brick, Granite, Marble, Tile, Aluminum, Gold, Silver, Stainless Steel, Brass, Titanium, Tungsten.

Enjoy stable dependable operation with an MTTF over 100,000 hours thanks to this engraver's solid-state laser source. Its 1064 nm wavelength provides exceptional metal marking, with a 65 µm spot able to engrave with smooth and delicate edging, minimal additional processing, and no waste of materials.

The laser arm's Sino-Galvo drive and scanning system provides outstanding accuracy and works with the F? Lens to produce both fast and stable marking of flat surfaces at speeds as fast as 275.6 inches per second (7000 mm/s). Lens creates vivid markings on flat surfaces by maintaining a consistent, focused laser spot size across its 4.3? Producing less than 1% distortion, it flawlessly executes intricate designs with unbelievable precision.

The dependable Beijing JCZ Tech control board organizes all of the aspects of this long-lasting multifunctional fiber laser marker and keeps them humming along. The workbed is compact and lightweight with a simple interface. The built-in grid allows convenient and safe adjustment of the laser's position. Its M5 holes can be fitted with positioning bars to keep your material just where you need it. Your EzCad2-based fiber laser engraver works with LightBurn's latest galvo functionality on Windows, MacOS, and Linux systems to let you create even the most intricate patterns easily.

Visible laser pointers let you focus the invisible marking ray quickly and easily. The scanning lens also provides a clear, safe red light preview of your pattern's outline for convenient positioning.

Your fiber laser comes with a bundled edition of EzCad2 engraving software compatible with Windows XP, Vista, 7, 8, and 10 and a wide range of graphics formats. Create marking magic at the push of a button! Our engraver comes with built-in support for standard rotary axes (not included) with 4-pin connectors. Enjoy plug and play engraving of rings, bracelets, cups, tubes, and other cylindrical surfaces. Separately grounded for your safety, the scanner, laser source, and rotary axis have separate power buttons.

The access key precludes any unauthorized use of your laser, and the circuit breaker is ready in case of emergencies. For even greater protection, this transparent acrylic cover can be purchesed separately, with its sepia tint filtering out engraving laser wavelength and protecting you and bystanders. The built-in interlock will automatically kill the laser when the cover is opened. A pair of OD4 laser glasses come included to protect your eyes from the 1064 nm beam of this laser, as well as offering protection from other alexandrite, diode, and neodymium (Nd:YAG) lasers.

Marking Area: 4.3×4.3 in. Compatible Image Software: AutoCAD, CorelDraw, Illustrator, Photoshop, etc. Expected Service Life: 100,000 hr.

Marking Depth(Depend on material): 0.002 in. Marking Speed: 275.6 ips (7000 mm/s).

Positioning Accuracy: ±0.1 µm. Compatible Materials: All Metals & Some Non-Metal Materials such as Leather, Hard Plastics, etc. 1 x 20 Watt Fiber Laser Marking Machine.

1 x USB Flash Drive (with Software). 1 x Hex Wrench Set. If the weight of your order exceeds 150 lbs.

Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging. We cannot take back used products. We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt. OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. Our affordable but quality lasers and US-based support quickly grew us into the largest online brand for precision engraving.

Alongside our skilled & helpful staff, OMTech users have built up a supportive online family in our forums and social media, sharing inspiration and sharpening their DIY skills together. We love keeping the OMTech family on the cutting edge of laser crafting because we know our growth is inseparable from your success.

All emails will be responded to within 12-24 hours. One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California.

This fiber laser marking machine can be used for many different engraving projects. The improved optical system includes a Galyo lens that improves marking speed and enables high-precision engraving. It comes with a ruler and a field lens for the most accurate markings. The large workbench can accommodate a wide variety of products, making your next engraving easier than ever.

Lift wheel enables height adjustments. Visible laser pointers help make focusing quick and easy. The built-in red laser locator calibrates with the laser's scanner to allow precision work on the machine's workbed. The Galvo Scanner and scanning system provides both outstanding accuracy and fast, stable marking of flat surfaces at speeds up to 393.7 inches p.

Lens helps create vivid markings on flat surfaces, maintaining a consistent, focused spot size across its 7.9? Achieve consistent focus on various materials using the support column's helpful ruler. Rotate the focus-height wheel for quick focusing on every material! Brief introduction of compact structure, portable and compact interface, convenient processing, flexible and adjustable control. Fiber laser marking machine adopts fiber laser, with a life of up to 100,000 hours, and its performance is better than the world ranking. Y is high, the output is TEM00, the focal diameter is less than 20um, and the divergence angl. Single-line semiconductor pump lasers are more sophisticated, especially for fine and precise marking. Small size, low power consumption, less than 500W power consumption; built-in air-cooled cooling mode, waste heavy water cooling unit, small footprint, more convenient installation, truly energy-saving, portable.

High electro-optic conversion efficiency, easy to use, no optical adjustment or maintenance, compact structure, high system integration and low failure. No maintenance, long service life, suitable for harsh environments. Fast processing speed, 2-3 times that of traditional marking machine, optical scanning galvanometer, high laser repetition frequency, high speed and no distortion. All fiber lasers with optical isolators can effectively shield the reflected light and perform high-brightness reflection on the surface of gold, silver, copper, aluminum, silicon, etc. Without deviating from the center of the field lens, greatly expanding the application field.

For different metals, it can produce a certain color by adjusting the frequency and energy. Marking software is powerful, compatible with Coreldraw, AutoCAD and other software files; supports PLT, PCX, DXF, BMP, etc. Can directly use SHX, TTF font support; automatic coding, print serial number, batch number, date, barcode, QR code, automatic jump number, USB interface output control. If you do not like the goods and would like to return them to us, please see below. Before returning the goods to us, please tell us first. Please return the goods to us within 7 days after you have received the goods.

Please confirm the goods as original packing. Ut please do not forget to send us some clear photos. Your kind consideration is highly appreciated. After you have ordered, you must pa.