20W 30W 50W Raycus Fiber Laser Marking Machine Metal Engraving EZCAD Lightburn

  

20W 30W 50W Raycus Fiber Laser Marking Machine Metal Engraving. 1 x Raycus Fiber Laser Marking Machine (20W QS/30W QS /50W QB Optional). 1 x 150x150mm Field lens. 1 x Rotary Axis A, B and C (Optional). 1 Pcs U Disk (USB).

4 pcs Fixed Sheet Metal. We also have red and black chassis colors.

If you need a red and black color scheme, please leave us a message and we will default to sending a gray chassis. If you want to use the rotary axis, then we suggest you choose the lens. Not bigger than 200x200mm, or it will cause the focal length is not. The marking area is optional.

With Same Lens, The Higher Power, more precise marking. With Same Power, The Smaller Lens, more precise marking. Bigger Lens Engrave Bigger Area.

Smaller Lens more precise marking. If 20w laser choose 200mm200mm lens, that means your focus distance is very tall, power come to mark object is cery very weak, so not biggest lens area is best, but choose suitable lens. 20w choose 70mm70mm, 110mm110mm 30w choose 70mm70mm, 110mm110mm, 150mm150mm, 200mm200mm 50w choose 70mm70mm, 110mm110mm, 200mm200mm, 300mm300mm. Note: We have two vision main board for this machine, BJJCZ for EZCAD software and BSL for Lightburn software which is optional, pls choose the one you want when you place the order.

We can provide EZCAD software if you need, but we do not provide Lightburn software!! If you choose a BSL board that supports Lightburn, please ensure that the Lightburn software is installed on your computer. BJJCZ Main Board Real Pic. BSL Main Board Real Pic.

Raycus 20W QS/30W QS/50W QB. 150150mm 5050mm / 7070mm / 110110mm / 175175mm / 200200mm /300300mm Optional. RAYCUS is 10.64 um. 4000 mm/s(RC1001) (it can change to SG7110, 8000mm/s, price is higher US150).

Text, pattern, date, bar code, etc. Microsoft Windows XP or Windows 2000, WIN 7, WIN8, WIN 10. EZCAD or Lightburn Control Software.

BMP, JPG, GIF, TGA, Ai, DXF, PLT, PNG, TIF, ai, DXF, DST, etc. 80 x 60 x 30cm. Gross weight is around 36KG. Model 1:D80 Rotary Axis. Motor: 5776mm(SNOWIT) With 2 Meter wire. Total height High version 250mm.

Centre height High version: 130mm. High version support 180 degree adjust. Application: Fiber laser marking / Laser welding / CO2 laser engraving. Model 2:Ring Jewelry Rotary Axis. Center height: 50MM (with an elevation angle of 90 degrees).

Internal clamp application (product outer diameter 2 to 83mm), External support application (product inner diameter 11 to 91mm). Application card needles: Factory equipped with four types of card needles with 3 each Transmission mode: direct connection. External dimensions: 130 90 90mm. Installation hole size: 50 50MM M5. Chuck maintenance, regularly adding lubricating oil to moving parts to improve service life.

Advantages: Strong force, no shaking. Quick loading and unloading, improving efficiency (RE: The 69 chuck is only suitable for light and short products such as rings, bracelets, insulated cup covers, etc For slightly heavier categories, it is recommended to use a standard three grip chuck).

Model 3:Round Wheel Rotary Axis. RE: 2 sides can use, front side with 24 channels, back side with M6 screw holes.

Need to use together with stepper motor drive. Channel: 24pcs (Back side each channel with 4 pcs M6 screw holes).