- Home
- Brand
- Laser Power
- Marking Size
- Marking Speed
- 0- 10000mm / S (155)
- 0-12000mm / S (3)
- 0-7000mm / S (11)
- 0-8000mm / S (78)
- 12m / S (3)
- 15000 Mm / S (3)
- 15000mm / S (149)
- 1500mm / S (2)
- 2m / S (2)
- 6000mm / S (6)
- 7000 Mm / S (67)
- 7000mm / S (114)
- 7m / S (23)
- 7m / S (275.6in / S) (45)
- 7m / S275.6in / S (4)
- 8000 Mm / S (65)
- 8000mm / S (6)
- Up To 10000mm / S (13)
- Up To 7000mm / S (2)
- ≤7000mm / S (8)
- ... (3633)
- Software
- Voltage
- 110 / 220v (128)
- 110 V (3)
- 110 V, 60 Hz (103)
- 110v (65)
- 110v / 220v (90)
- 110v / 220v Optional (3)
- 110v 60hz (78)
- 110v, 50 Hz (3)
- 110v, 50hz (4)
- 110v, 60 Hz (38)
- 110v, 60hz (10)
- 120v 60hz (5)
- 220v (13)
- 220v / 110v (2)
- 220v, 50 Hz (9)
- 220v, 60 Hz (6)
- Ac 110 / 220v (5)
- Ac 110 V (7)
- Ac 110v (3)
- Ac220 / 50hz (12)
- ... (3805)
30W Fiber Laser Marking Workstation (Install + On-Site Training Included)
If you want a fiber laser that actually shows up ready to work, this is it. This is a complete 30W industrial fiber laser marking system built around a.
Source, packaged on a rolling cart with a dedicated Windows PC and a clean operator setup. We deliver locally, set it up, verify operation, and train you onsite so you can start producing the same day. Metal marking: serial numbers, part IDs, logos, QR codes, data plates.
Works great on stainless, anodized aluminum, coated metals, brass, tool steel (results depend on material and finish). Ideal for small batch and light production use. 30W fiber marking head on an adjustable column. Rolling workstation cart with clean mounting and cable management. Dedicated Windows PC (included) set up for laser use. Touchscreen monitor on an articulating mount. (2) LightBurn license files so you can design/program on a second computer (laptop/office PC) while the laser PC stays dedicated. LG10 safety glasses for operator + observer. Starter templates and workflow setup (file organization, basic job templates, serialization basics).Workstation placement + safe startup checklist. Full software setup, configuration, and verification. Focus procedure and repeatable part setup.
Importing artwork, text, QR codes, serialization. Real-world tips to avoid wasted parts and downtime. Basic maintenance and "don't do this" guidance. This is a marking/engraving system, not a metal cutting machine. Performance depends on material, coatings, and artwork.
We'll show you what's realistic for your parts. Marking area: 175mm x 175mm (6.9" x 6.9"). Max marking speed: up to 7000 mm/s. Frequency range: 30 to 60 kHz.
Laser wavelength: 1064 nm (standard fiber). Single-pass marking depth (typical): up to 0.003 (varies by material and settings). Main unit: 17 3/4" W x 15 3/4" D.