Raycus QB30W Laser Fiber Marking & Rotary Dual Field Lens EzCad2 Metal 300300mm

  

Raycus QB/JPT LP/MAX(Optional) Laser Source, built-in red light, more stability than Raycus Q or QS. Support to customize the marking machine according to your needs.

SINO-Galvo SG7110 model scan head;? JCZ EZCAD Control Board & EZCAD2.0 LITE Software: Supports Win7/8/10/11 and PLT, BMP, DXF, JPG, TIF, AI, PNG, JPG, etc formats. High-Rate of Electrical- Optical Conversion: up to 70%;? JPT LP(Raycus QB/ MAX) 50W/30W+1064nm F-Theta Lens(Marking Area): 200200mm(Optional)+ 80mm Rotary Axis. Applicable Materials: Platinum, Tungsten, Titanium, Carbide Nickel, Carbon Steel, Aluminum, Stainless Steel, Brass, Copper, Gold, Silver, metals, etc.

Also some of nonmetal such as nylon, light button, ABS, PVC, PES, etc. Ultra-wide column, more stable marking? Adopt 130mm thickening, widening, strengthen the lifting column, sturdy and durable. 1 x Fiber Laser Machine. 30W Portable Fiber Laser Marking Machine.

The 30W portable fiber laser machine can mark on both metal and non-metal, which has the characteristics of sturdy, high efficiency, durable, and reliable. It is widely used for marking jewelry, keyboards of cell phones, auto parts, electronic components, electronic appliances, communication apparatus, sanitary wares, buckles, kitchenware, sterile equipment, hardware tools, knife, glasses, clock, cooker, stainless steel products, etc. Aluminum is one of the most commonly marked substrates, and we use it in many industries.

Typically, with lighter marking intensity, aluminum will turn white. Anodized aluminum looks good, but white marking is not ideal for bare and cast aluminum. More intense laser settings provide a dark grey or charcoal color. Each DLM fiber laser engraving machine is capable for aluminum marking.

The ideal system for your application depends on your laser marking requirements. Ablation is the most common marking technique for anodized aluminum, but some people call for etching or engraving. Brass and copper have high thermal conductivity and thermal transfer properties. So we use it for wiring, printed circuit boards and pressurized flow meters. Their thermal properties are ideal for laser marking systems for metal because the heat is quickly dissipated. This reduces the impact the laser can have on the structural integrity of the material. Every DLM fiber laser engraving machine is capable of marking on brass and copper and the ideal system for your application depends on your marking requirements. The best marking technique depends on the finish of the brass or copper. Smooth surfaces can offer a soft polished marking affect, but also can do annealed, etched, or engraved.

Etching or engraving is best in order to provide readability by humans and machines. In some cases a dark anneal can work, but surface irregularities can cause reduced readability. Tungsten and Carbide are two of the hardest metals on earth and are widely used in tooling and cutting applications. Another popular segment for these substrates is wedding bands for men. Tungsten and carbide are receptive laser marking metals and laser engraving metals.

Each and every DLM Laser series is capable of marking on tungsten and carbide and the ideal system for your application depends on your marking requirements. For carbide, because of the darker color it naturally has, getting a contrasting mark is rather easy with even light laser intensity. A white color is most common when polishing or annealing carbide and the contrast is extremely good. Chrome plating provides a stylish and sophisticated finish, and usually requires minimal laser intensity to remove or get through the plating.

We need take ensure the marking happens on the surface only, with no impact to the chrome plating. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".

The seller is "chinacnczone-au" and is located in this country: US. This item can be shipped worldwide.

• Type: Engraving Machine
• Material: Metal
• Model: 30W Portable Fiber Laser Marking Machine
• Power: 30 W
• Engraving Method: Laser
• Machine Operation: Computerized
• Engraving Application: Signs
• Application Shape: Rectangle
• Product: Fiber laser engraver
• Voltage: 110 V, 60 Hz
• Marking size: 300x300 mm(11.8*11.8 inch)
• Features: With laser focusing function
• Laser wavelength: 1064nm
• Laser frequency: 20-80 KHz
• Marking depth: <1 mm
• Marking Speed: 8000 mm/s
• Minimum line width: 0.01 mm
• Repeatability: +/-0.0001 mm
• Beam quality: <1.6
• Life: 100000 h
• Compatible Software: Auto-Cad, CorelDraw, Photoshop
• Computer system: Windows XP/7/8/10 (Support 32/64 bit)
• File format: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT, etc
• Brand: Raycus
• Country/Region of Manufacture: China